Rate this Article:
PrintMARINATED OLIVES
Serves :
6
Preparation Time :
Preparation Method :
- Put the olives in a bowl and scatters over the orange rind, bay leaves and garlic.
- Crush all the seeds using a pestle and mortar and add them to the bowl with the coriander, vinegar and a little black pepper.
- Mix well and turn into a small bowl.
- Pour over the oil so the olives are just immersed, cover with a lid or foil and store in the refrigerator.
INGREDIENTS
- 500 grams black or green olives
- Several pared strips of orange rind
- 8 bay leaves
- 2 small garlic clove, crushed
- 2 teaspoon cumin seeds
- 2 teaspoon coriander seeds
- 2 teaspoon fennel seeds
- 4 tablespoons finely chopped fresh coriander
- 4 tablespoons red, white or sherry vinegar
- 300 ml Cooking oil
- Pepper
6 comments for “Marinated Olives”
What's new @ lekhafoods.com
©Copyright 2012, lekhafoods, All Rights Reserved
The neatly organized content is nice to see. Can I quote your blog and write it on my blog?먹튀검증 먹튀검증 안전놀이터 토토사이트 꽁머니 꽁머니
You can rely on our top quality and brilliant with cheap essay writing service UK simply because have the most reliable and best essay writers. All our writers are graduates from top universities and have many years of experience in custom cheap dissertation writing service UK and cheap thesis writing service UK. In addition, all the writers are native English speakers and are familiar with your education syllabus hence the reason we assure you that we are well equipped to handle your cheap assignment writing service UK and cheap coursework writing service UK.
FAG 2207KTV+H307 bearing. Whether the NSK bearing is installed correctly will directly affect the accuracy, life and performance of the bearing during use. (1) When cleaning a large number of NSK bearings, first use hot machine oil at a temperature of 90～100℃ to melt the encapsulating oil. At the same time, use a seamless and chip-free tool to dig out all the old oil, and then blanch it for a few minutes. Then rinse with kerosene to remove the engine oil, and finally clean it again with gasoline. After cleaning, wear film gloves and place the NSK bearing on a clean cloth or paper on the workbench to dry. (2) Before the NSK bearing is installed, you should use appropriate measuring tools to check the machining quality of the shaft, seat hole and related parts (such as dimensional accuracy, shape accuracy, surface roughness, etc.) according to the technical requirements on the design drawings. (3) Open the NSK bearing package before installation, immerse it in the above-mentioned gasoline and other liquids and rotate it gently by hand to ensure that the cage, rolling elements and the sealing oil on the surface of the raceway are thoroughly cleaned. (4) The assembly surface should be cleaned with clean gasoline, kerosene, toluene or xylene and other solutions, and dried with a clean cloth, and then coated with a thin layer of lubricating oil, which will make the installation and operation more convenient. (5) Note that NSK bearings with seals cannot be cleaned by this method, and the inside of the seal should be kept intact and cannot be cleaned. (6) If there are bumps, burrs, rust spots or solid particles (such as abrasive debris, sand, mud) on the assembly surface of the shaft and the bearing seat hole, it will not only make the installation of the NSK bearing difficult and make the installation position incorrect, but also If solid particles fall into the NSK bearing, it will have a grinding effect. When the NSK bearing rotates, it will scratch or scratch the working surface of the NSK bearing. Therefore, it must be carefully checked before installation. If the above defects are found, they should be corrected. . For example, use an oil file to remove burrs, raised bumps, and rust spots, and polish with a fine emery cloth. Another example is to clean solid particles and dirt.
https://www.hasbihal.org/ Mircturk Mircturk.org İslam Sohbet Türk Sohbet Cinsel Sohbet Mevsim Sohbet Güzel Sohbet
Posted Tuesday, February 7, 2023 at 7:46:13 PM